www.element14.com www.farnell.com www.newark.com www.cpc.co.uk page <1> v1.0 01/03/13 heatshrink adhesive lined description: this is a fexible, fame retarded heat-shrinkable polyolefn tubing, with a shrink ratio of 4 : 1 with a thick wall adhesive which melts and fows, to seal components contained within. recommended for applications requiring water-proofng for light cable and wire harnesses and protection of connector components. features : ? epa method 3050b : 1996 other acid digestion ? bsen1122 : 2001 method b other acid digestion ? epa method 3052b : 1996 other acid digestion ? epa method 3060 and epa 7196a : 1992 ? atomic absorption spectrometer / inductively coupled plasma atomic emission spectrometer (icp + aes) uv-vis spectrophotometer characteristics: operating temperature : -55c to +125c minimum shrink temperature : 70c shrink ratio : 3:1 and 4:1 standard colour : black (other colours are also available on request) applications: manufactured by co-extrusion of polyolefn and hot-melt adhesive. designed to provide both insulation and sealing for the protected items. typically uses are the protection of automotive wires, bundled wires and metal tubes against water and moisture. the high expansion ratio makes it possible to repair most damaged cable jackets without removing connectors. property test method typical data tensile strength astm d 2671 10.4mpa ultimate elongation (%) 30 longitudinal shrinkage (%) ul 224 0 to -10 heat aging ultimate elongation (%) 158, 168hr 200 flammability vw-1 pass (outer jacket only) dielectric strength (kv / mm) iec 243 20 volume resistivity (ohm-cm) ul224 1 1014 copper stability astm d 2671 pass corrosion ul224 no corrosion technical data:
|
